Difficulty

Moderate

Steps

9

Time Required

                          10 minutes

Sections

3

  • Back Cover
  • 3 steps
  • Battery
  • 3 steps
  • Touch Pad
  • 3 steps

Flags

0

  • BackLenovo Yoga C930-13IKB

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

To access the touch pad, you will need to remove the back cover and the battery, which is outlined below. Then the back of the touch pad will be exposed and you can take it out once all the fasteners have been removed.

What you need

Step 1

              Back Cover
  • Flip the device over so that the underside is facing up.
  • Remove the six 3.5 mm T5 Torx screws.

Flip the device over so that the underside is facing up.

Remove the six 3.5 mm T5 Torx screws.

1024

Step 2

  • Pry off the back cover using the plastic opening tool.
  • Loosen the back cover in multiple spots using the opening tool, then remove the whole back.
  • You may have to run the plastic tool along the edges until you find a small gap to separate the back cover from the laptop.
  • Do not use a metal tool when working with your device.

Pry off the back cover using the plastic opening tool.

Loosen the back cover in multiple spots using the opening tool, then remove the whole back.

You may have to run the plastic tool along the edges until you find a small gap to separate the back cover from the laptop.

Do not use a metal tool when working with your device.

Step 3

  • Carefully lift the cover off with your hands.

Carefully lift the cover off with your hands.

Step 4

              Battery
  • Unplug the battery from the motherboard by pinching the cables with your fingers and tugging out with force.
  • Use the spudger for assistance.

Unplug the battery from the motherboard by pinching the cables with your fingers and tugging out with force.

Use the spudger for assistance.

Step 5

  • Unscrew the four 3mm screws with a Phillips screwdriver.

Unscrew the four 3mm screws with a Phillips screwdriver.

Step 6

  • The battery is still held in place with two stretch-release adhesive strips, similar to ones found in an iPhone.
  • Use your fingers to pry up the clear plastic pull-tab for one of the stretch release adhesives.
  • Grasp the pull-tab and slowly pull away from the battery at a shallow angle. The adhesive strip will stretch to many times its length and slowly release from underneath the battery.
  • Repeat the procedure for the second strip on the opposite side of the battery.
  • Be careful not to bend the battery. Breaking the battery is dangerous.
  • Remove the battery with your hands.

The battery is still held in place with two stretch-release adhesive strips, similar to ones found in an iPhone.

Use your fingers to pry up the clear plastic pull-tab for one of the stretch release adhesives.

Grasp the pull-tab and slowly pull away from the battery at a shallow angle. The adhesive strip will stretch to many times its length and slowly release from underneath the battery.

Repeat the procedure for the second strip on the opposite side of the battery.

Be careful not to bend the battery. Breaking the battery is dangerous.

Remove the battery with your hands.

Step 7

              Touch Pad
  • Unscrew the four 2 mm screws with a Phillips #00 screwdriver.

Unscrew the four 2 mm screws with a Phillips #00 screwdriver.

Step 8

  • Carefully pull out the small electrical wire from the back of the touch pad.

Carefully pull out the small electrical wire from the back of the touch pad.

Step 9

  • The touch pad must be slid out before being lifted out.
  • Lift up the touch pad.
  • Slide the touch pad out of the laptop.

The touch pad must be slid out before being lifted out.

Lift up the touch pad.

Slide the touch pad out of the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Matteo

Member since: 01/23/2020

97 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Cal Poly, Team S19-G5, White Winter 2020                        

                                                  Member of Cal Poly, Team S19-G5, White Winter 2020 



                    CPSU-WHITE-W20S19G5                     


                                            4 Members                     


                                            16 Guides authored