Difficulty

Moderate

Steps

5

Time Required

                          5 minutes

Sections

2

  • Back Cover
  • 3 steps
  • SSD
  • 2 steps

Flags

0

  • BackLenovo Yoga C930-13IKB

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

The SSD card is easy to access and remove. You only need to remove the back cover to access the SSD, and then remove the fasteners attaching the SSD to the motherboard. For this guide, you will need a plastic opening tool, a T5 Torx screwdriver, and a Phillips #00 screwdriver.

What you need

Step 1

              Back Cover
  • Flip the device over so that the underside is facing up.
  • Remove the six 3.5 mm T5 Torx screws.

Flip the device over so that the underside is facing up.

Remove the six 3.5 mm T5 Torx screws.

1024

Step 2

  • Pry off the back cover using the plastic opening tool.
  • Loosen the back cover in multiple spots using the opening tool, then remove the whole back.
  • You may have to run the plastic tool along the edges until you find a small gap to separate the back cover from the laptop.
  • Do not use a metal tool when working with your device.

Pry off the back cover using the plastic opening tool.

Loosen the back cover in multiple spots using the opening tool, then remove the whole back.

You may have to run the plastic tool along the edges until you find a small gap to separate the back cover from the laptop.

Do not use a metal tool when working with your device.

Step 3

  • Carefully lift the cover off with your hands.

Carefully lift the cover off with your hands.

Step 4

              SSD
  • Remove the screw ( 2 mm with a 5 mm head) that connect the SSD to the motherboard using a Phillips #00 screwdriver.

Remove the screw ( 2 mm with a 5 mm head) that connect the SSD to the motherboard using a Phillips #00 screwdriver.

Step 5

  • Pinch the left side of the SSD card.
  • Pull gently to the left, horizontal to the laptop.

Pinch the left side of the SSD card.

Pull gently to the left, horizontal to the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 6 other contributors 


                    Hanna Lazkani

Member since: 01/23/2020

695 Reputation

                                      3 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges

Team

                       Cal Poly, Team S19-G5, White Winter 2020                        

                                                  Member of Cal Poly, Team S19-G5, White Winter 2020 



                    CPSU-WHITE-W20S19G5                     


                                            4 Members                     


                                            16 Guides authored

John Tullos - Jan 2, 2021

Reply

I need to remove the stripped screw on the SSDs non-slot-end because Lenovo tightened it down with a military grade drill. To replace, it wasn’t mentioned which size screw was there.