Lenovo Yoga C930 13Ikb Coolant Fan Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          20 - 30 minutes            

Sections

2

• Back Cover
• 3 steps
• Coolant Fans
• 5 steps

Flags

0

• BackLenovo Yoga C930-13IKB

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Back Cover               

• Flip the device over so that the underside is facing up.
• Remove the six 3.5 mm T5 Torx screws.

Flip the device over so that the underside is facing up.

Remove the six 3.5 mm T5 Torx screws.

1024

Step 2

• Pry off the back cover using the plastic opening tool.
• Loosen the back cover in multiple spots using the opening tool, then remove the whole back.
• You may have to run the plastic tool along the edges until you find a small gap to separate the back cover from the laptop.
• Do not use a metal tool when working with your device.

Pry off the back cover using the plastic opening tool.

Loosen the back cover in multiple spots using the opening tool, then remove the whole back.

You may have to run the plastic tool along the edges until you find a small gap to separate the back cover from the laptop.

Do not use a metal tool when working with your device.

Step 3

• Carefully lift the cover off with your hands.

Carefully lift the cover off with your hands.

Step 4

              Coolant Fans               

• Remove the four 3 mm Phillips #0 screws from the fan assembly.

Remove the four 3 mm Phillips #0 screws from the fan assembly.

Step 5

• Remove the four 2 mm Phillips #00 screws from the fans themselves.

Remove the four 2 mm Phillips #00 screws from the fans themselves.

Step 6

• Unscrew the three 3 mm Phillips #0 screws on the heatsink.

Unscrew the three 3 mm Phillips #0 screws on the heatsink.

Step 7

• Use a plastic opening tool to remove the two small, white power cable connectors for each of the two fans.

Use a plastic opening tool to remove the two small, white power cable connectors for each of the two fans.

Step 8

• Gently lift the fan assembly out of the laptop.
• Be sure to clean and reapply thermal paste to the heatsink during reassembly.

Gently lift the fan assembly out of the laptop.

Be sure to clean and reapply thermal paste to the heatsink during reassembly.

To reassemble your device, follow these instructions in reverse order. Remember to apply fresh thermal paste to the heatsink during reassembly.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Josiah Grayson Sawyer                     

Member since: 09/17/2020

481 Reputation

                                      3 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       The Citadel Military College of South Carolina, Team S3-G23, Eggleston Fall 2020                        

                                                  Member of The Citadel Military College of South Carolina, Team S3-G23, Eggleston Fall 2020 



                    CMCSC-EGGLESTON-F20S3G23                     


                                            3 Members                     


                                            3 Guides authored