Difficulty
Easy
Steps
3
Time Required
2 minutes
Sections
1
- Back Cover
- 3 steps
Flags
0
BackLenovo Yoga C930-13IKB
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Everything required to begin getting inside your device is here. For this guide, you will need a plastic opening tool and a T5 Torx screwdriver.
Make sure to turn off the device before taking it apart.
What you need
Step 1
Back Cover
- Flip the device over so that the underside is facing up.
- Remove the six 3.5 mm T5 Torx screws.
Flip the device over so that the underside is facing up.
Remove the six 3.5 mm T5 Torx screws.
1024
Step 2
- Pry off the back cover using the plastic opening tool.
- Loosen the back cover in multiple spots using the opening tool, then remove the whole back.
- You may have to run the plastic tool along the edges until you find a small gap to separate the back cover from the laptop.
- Do not use a metal tool when working with your device.
Pry off the back cover using the plastic opening tool.
Loosen the back cover in multiple spots using the opening tool, then remove the whole back.
You may have to run the plastic tool along the edges until you find a small gap to separate the back cover from the laptop.
Do not use a metal tool when working with your device.
Step 3
- Carefully lift the cover off with your hands.
Carefully lift the cover off with your hands.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Hanna Lazkani
Member since: 01/23/2020
695 Reputation
3 Guides authored
Badges:
15
+12 more badges
Team
Cal Poly, Team S19-G5, White Winter 2020
Member of Cal Poly, Team S19-G5, White Winter 2020
CPSU-WHITE-W20S19G5
4 Members
16 Guides authored