Difficulty
Moderate
Steps
7
Time Required
10 minutes
Sections
2
- Back Cover
- 2 steps
- USB 3.0 Port
- 5 steps
Flags
0
BackLenovo Yoga 920-13IKB
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Flip the device over to access the screws on the back cover.
- Remove the ten 5mm Torx T5 screws on the back cover to loosen the back cover.
Flip the device over to access the screws on the back cover.
Remove the ten 5mm Torx T5 screws on the back cover to loosen the back cover.
1024
Step 2
- Slide the iFixit Opening Tool under the back cover to lift it up.
- Pull up on the cover with your hand to release the tab holding the center of the cover in place.
Slide the iFixit Opening Tool under the back cover to lift it up.
Pull up on the cover with your hand to release the tab holding the center of the cover in place.
Step 3
USB 3.0 Port
- Disconnect the red and black wire connected to the speaker using the iFixit Tweezers.
Disconnect the red and black wire connected to the speaker using the iFixit Tweezers.
Step 4
- Lift up the black tab on the flat cable connector with the iFixit Opening Tool.
Lift up the black tab on the flat cable connector with the iFixit Opening Tool.
Step 5
- Flip up the tab using the iFixit Tweezers to release the flat cable.
Flip up the tab using the iFixit Tweezers to release the flat cable.
Step 6
- Undo the two 3mm Phillips #00 screws to loosen the USB 3.0 board.
Undo the two 3mm Phillips #00 screws to loosen the USB 3.0 board.
Step 7
- Remove the USB 3.0 Board from the device using the iFixit Opening Tool.
Remove the USB 3.0 Board from the device using the iFixit Opening Tool.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 4 other contributors
Alyssa McCulloch
Member since: 01/24/2019
1,721 Reputation
9 Guides authored
Badges:
14
+11 more badges
Team
Cal Poly, Team S2-G3, White Winter 2019
Member of Cal Poly, Team S2-G3, White Winter 2019
CPSU-WHITE-W19S2G3
4 Members
29 Guides authored
Sean Puffett - Oct 7, 2019
Reply
Just wanted to say thank you to Alyssa and the others who contributed to this.
I just used your guide to fix a problem with my Yoga constantly entering and waking (repeatedly, seconds apart) from connected sleep mode. Infuriating. It was accompanied by the USB connect/disconnect sound as well.
Using the Event Viewer I managed to find out it was entering sleep mode in response to the power button (which I wasn’t pressing). So, I used your guide to disconnect and reconnect the USB board and it has resolved my issue.
iFixIt gained some tools income, you gained some more reputation points, and I gained a laptop that’s behaving itself now!
Now, what else can I break? ;o)