Difficulty
Moderate
Steps
5
Time Required
4 - 5 minutes
Sections
2
- Back Cover
- 2 steps
- Speaker
- 3 steps
Flags
0
BackLenovo Yoga 920-13IKB
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Flip the device over to access the screws on the back cover.
- Remove the ten 5mm Torx T5 screws on the back cover to loosen the back cover.
Flip the device over to access the screws on the back cover.
Remove the ten 5mm Torx T5 screws on the back cover to loosen the back cover.
1024
Step 2
- Slide the iFixit Opening Tool under the back cover to lift it up.
- Pull up on the cover with your hand to release the tab holding the center of the cover in place.
Slide the iFixit Opening Tool under the back cover to lift it up.
Pull up on the cover with your hand to release the tab holding the center of the cover in place.
Step 3
Speaker
- Remove two 3mm Phillips #00 screws that hold the speaker in place.
- These steps are applicable for the speaker on the right or left. Identify the speaker to replace then proceed.
Remove two 3mm Phillips #00 screws that hold the speaker in place.
These steps are applicable for the speaker on the right or left. Identify the speaker to replace then proceed.
Step 4
- Disconnect the red and black wire from the motherboard to free the speaker.
Disconnect the red and black wire from the motherboard to free the speaker.
Step 5
- Lift up the speaker with the iFixit Opening Tool and remove the speaker.
Lift up the speaker with the iFixit Opening Tool and remove the speaker.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Alyssa McCulloch
Member since: 01/24/2019
1,721 Reputation
9 Guides authored
Badges:
14
+11 more badges
Team
Cal Poly, Team S2-G3, White Winter 2019
Member of Cal Poly, Team S2-G3, White Winter 2019
CPSU-WHITE-W19S2G3
4 Members
29 Guides authored