Difficulty
Moderate
Steps
3
Time Required
7 - 15 minutes
Sections
2
- Back Panel
- 1 step
- Battery
- 2 steps
Flags
0
BackLenovo Yoga 910-13IKB
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Turn the laptop over and remove the ten Torx T5 screws along the perimeter of the bottom panel using the T5 Torx Screwdriver.
- Remove the back panel from the device exposing the components.
Turn the laptop over and remove the ten Torx T5 screws along the perimeter of the bottom panel using the T5 Torx Screwdriver.
Remove the back panel from the device exposing the components.
1024
Step 2
Battery
- Remove the four 3 mm Phillips #0 screws holding the battery in place.
Remove the four 3 mm Phillips #0 screws holding the battery in place.
Step 3
- Disconnect the battery cable from its motherboard socket by gently pulling it towards the battery. The spudger tool may be needed to lift the flap seal.
- Pull parallel to the battery, not straight up.
- Pull evenly on the width of the cable so that no individual wire is overly strained.
- Lift the battery out.
Disconnect the battery cable from its motherboard socket by gently pulling it towards the battery. The spudger tool may be needed to lift the flap seal.
Pull parallel to the battery, not straight up.
Pull evenly on the width of the cable so that no individual wire is overly strained.
Lift the battery out.
To reassemble your device, follow these instructions in reverse order.
For optimal performance, after completing this guide, calibrate your newly installed battery.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
Cancel: I did not complete this guide.
5 other people completed this guide.
Author
with 7 other contributors
Pablo Gonzalez
Member since: 01/23/2020
454 Reputation
2 Guides authored
Badges:
10
+7 more badges
Team
Cal Poly, Team S1-G5, White Winter 2020
Member of Cal Poly, Team S1-G5, White Winter 2020
CPSU-WHITE-W20S1G5
4 Members
14 Guides authored
oslodave - Feb 10, 2022
Reply
Step 3-6 are redundant to simply change the battery, correct?
Arthur Shi - Feb 14, 2022
You’re right! I fixed the guide to reflect this.
Noah - Dec 28, 2022
Reply
Maybe I haven’t seen many battery connectors, but this is one of the most annoying to reinsert.