Lenovo Yoga 900 13Isk Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 minutes

Sections

Back Cover
2 steps
Battery
2 steps

Flags

BackLenovo Yoga 900-13ISK
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Batteries, even old ones, are toxic and cannot be thrown away in your normal waste bin. Please find a suitable e-waste recycler near you to properly dispose of your old battery.

For your safety, discharge your battery below 25% before disassembling your device. This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair. If the battery within your device is swollen, take appropriate precautions.

Be sure to unplug and completely turn off your device before you start working.

What you need

Step 1

              Back Cover

Using a T5 Torx screwdriver, remove the ten 5.5 mm screws from the back case of the laptop.

Using a T5 Torx screwdriver, remove the ten 5.5 mm screws from the back case of the laptop.

1024

Step 2

Use a spudger to pry open the back case at the hinges of the laptop.
There are plastic clips around the perimeter of the case holding down the back cover. These will need to be popped off as the cover is removed.
Use your fingers to completely pop off the back cover.

Use a spudger to pry open the back case at the hinges of the laptop.

There are plastic clips around the perimeter of the case holding down the back cover. These will need to be popped off as the cover is removed.

Use your fingers to completely pop off the back cover.

Step 3

              Battery

Remove the five 3.6 mm screws from the battery with a Phillips #00 screwdriver.

Remove the five 3.6 mm screws from the battery with a Phillips #00 screwdriver.

Step 4

Grab the bottom corners of the battery and gently pull the battery until the cable disconnects from the connector on the motherboard.
While reassembling, use a plastic spudger to push the battery cable into the connector on the underside of the motherboard. This will be easier to do before the screws are replaced.

Grab the bottom corners of the battery and gently pull the battery until the cable disconnects from the connector on the motherboard.

While reassembling, use a plastic spudger to push the battery cable into the connector on the underside of the motherboard. This will be easier to do before the screws are replaced.

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

For optimal performance, after completing this guide, calibrate your newly installed battery.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    Austin Blakely

Member since: 03/11/2019

16,291 Reputation

                                      52 Guides authored                  



                       Badges:
                       37







                                                        +34 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,772 Guides authored

Elaine Gelb - Sep 23, 2022

Phillips 00 will not fit the 5 screws in my computer!

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team