Difficulty

Easy

Steps

7

Time Required

                          10 - 20 minutes

Sections

2

  • Bottom Cover
  • 3 steps
  • Wireless Card
  • 4 steps

Flags

0

  • BackLenovo YOGA 730-15IKB

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Also see the troubleshooting page to diagnose potential software issues related to Wi-Fi.

What you need

Step 1

              Bottom Cover
  • Turn off the computer and unplug the charger before going any further.
  • Flip the laptop over so you can see the underside.
  • Remove the ten 7mm T5 Torx screws.

Turn off the computer and unplug the charger before going any further.

Flip the laptop over so you can see the underside.

Remove the ten 7mm T5 Torx screws.

1024

Step 2

  • Pry up the bottom cover with an opening tool.
  • Start at the front edge of the cover and make your way along the sides.

Pry up the bottom cover with an opening tool.

Start at the front edge of the cover and make your way along the sides.

Step 3

  • Pull the bottom cover up and away from the back hinges.

Pull the bottom cover up and away from the back hinges.

Step 4

              Wireless Card
  • Remove the sticky tape from the top edge of the wireless card.

Remove the sticky tape from the top edge of the wireless card.

Step 5

  • Pull the black and white antenna wires off of the wireless card.
  • For reassembly, the white wire connects to the right terminal marked “1.” The black wire connects to the left terminal marked “2.”

Pull the black and white antenna wires off of the wireless card.

For reassembly, the white wire connects to the right terminal marked “1.” The black wire connects to the left terminal marked “2.”

Step 6

  • Remove one 2mm Phillips #1 screw.

Remove one 2mm Phillips #1 screw.

Step 7

  • Pull the wireless card out of the socket at its resting angle.
  • Do not pull straight upward. Pull towards the hinges at the back of the laptop.

Pull the wireless card out of the socket at its resting angle.

Do not pull straight upward. Pull towards the hinges at the back of the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Ellis Ruckman

Member since: 01/23/2020

2,451 Reputation

                                      6 Guides authored                  



                       Badges:
                       21







                                                        +18 more badges

Team

                       Cal Poly, Team S1-G6, White Winter 2020                        

                                                  Member of Cal Poly, Team S1-G6, White Winter 2020 



                    CPSU-WHITE-W20S1G6                     


                                            3 Members                     


                                            27 Guides authored