Difficulty
Moderate
Steps
9
Time Required
15 - 30 minutes
Sections
3
- Bottom Cover
- 3 steps
- Battery
- 3 steps
- Touchpad
- 3 steps
Flags
0
BackLenovo YOGA 730-15IKB
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bottom Cover
- Turn off the computer and unplug the charger before going any further.
- Flip the laptop over so you can see the underside.
- Remove the ten 7mm T5 Torx screws.
Turn off the computer and unplug the charger before going any further.
Flip the laptop over so you can see the underside.
Remove the ten 7mm T5 Torx screws.
1024
Step 2
- Pry up the bottom cover with an opening tool.
- Start at the front edge of the cover and make your way along the sides.
Pry up the bottom cover with an opening tool.
Start at the front edge of the cover and make your way along the sides.
Step 3
- Pull the bottom cover up and away from the back hinges.
Pull the bottom cover up and away from the back hinges.
Step 4
Battery
- Disconnect the battery from the motherboard by gently pulling the battery cable using your fingers or a pair of tweezers.
- Pull parallel to the battery, not straight up.
- Unplug the cable gently as the eight wires on the connector are very small and delicate.
Disconnect the battery from the motherboard by gently pulling the battery cable using your fingers or a pair of tweezers.
Pull parallel to the battery, not straight up.
Unplug the cable gently as the eight wires on the connector are very small and delicate.
Step 5
- Remove the four 4mm Phillips #1 screws securing the battery.
Remove the four 4mm Phillips #1 screws securing the battery.
Step 6
- Lift the battery up and out of the chassis.
- Handle the battery carefully. Touching the terminal may cause electric shock. Puncturing the battery may cause it to catch fire.
Lift the battery up and out of the chassis.
Handle the battery carefully. Touching the terminal may cause electric shock. Puncturing the battery may cause it to catch fire.
Step 7
Touchpad
- The touchpad is connected by a ribbon cable to the front edge of the motherboard.
- Pull up on the black tab on the touchpad cable connector.
- The ribbon cable should easily pull out of the connector.
The touchpad is connected by a ribbon cable to the front edge of the motherboard.
Pull up on the black tab on the touchpad cable connector.
The ribbon cable should easily pull out of the connector.
Step 8
- Remove six 2mm Phillips #000 screws.
- Some of these screws may be hidden under other ribbon cables.
Remove six 2mm Phillips #000 screws.
Some of these screws may be hidden under other ribbon cables.
Step 9
- Pull up on the top edge of the touchpad near the motherboard. Lift the touchpad up and out of the chassis.
Pull up on the top edge of the touchpad near the motherboard. Lift the touchpad up and out of the chassis.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Daniel Rodriguez Salinas
Member since: 01/23/2020
433 Reputation
4 Guides authored
Badges:
8
+5 more badges
Team
Cal Poly, Team S1-G6, White Winter 2020
Member of Cal Poly, Team S1-G6, White Winter 2020
CPSU-WHITE-W20S1G6
3 Members
27 Guides authored
