Lenovo Yoga 720 Bottom Cover Replacement Repair Guide

Difficulty

Easy

Steps

3

Time Required

                          1 - 3 minutes            

Sections

1

• Bottom Cover
• 3 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackLenovo Yoga 720-13IKB

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Bottom Cover               

• Before you begin, be sure to turn off your laptop and discharge the battery down to 25%.
• Start by flipping the device over so that you see the screws.
• Remove seven Torx T5 short screws.
• Remove three Torx T5 long screws.

Before you begin, be sure to turn off your laptop and discharge the battery down to 25%.

Start by flipping the device over so that you see the screws.

Remove seven Torx T5 short screws.

Remove three Torx T5 long screws.

1024

Step 2

• Starting from the USB port, use your opening tool to gently pry up the case.
• Make sure you are prying on the cover itself, not the metal shield around the USB port.
• Pry along the laptop in the order shown by the arrows.
• Do NOT pry along the top side, or you risk damaging the casing. Stay with the arrows.

Starting from the USB port, use your opening tool to gently pry up the case.

Make sure you are prying on the cover itself, not the metal shield around the USB port.

Pry along the laptop in the order shown by the arrows.

Do NOT pry along the top side, or you risk damaging the casing. Stay with the arrows.

Step 3

• Lift the case from the bottom side. NOT the side with the hinges.
• When you feel resistance, do NOT keep lifting or you will damage the housing.
• Once you feel resistance, gently pull the case towards you. (away from the hinges.)
• Remove the case.

Lift the case from the bottom side. NOT the side with the hinges.

When you feel resistance, do NOT keep lifting or you will damage the housing.

Once you feel resistance, gently pull the case towards you. (away from the hinges.)

Remove the case.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Aiden                     

Member since: 09/19/2015

16,424 Reputation

                                      20 Guides authored                  



                       Badges:
                       49







                                                        +46 more badges                           

Björn Ridell - Mar 28, 2022

Reply

Can’t seem to find information about this but why should I discharge the laptop to 25% before I do this?

I bought a new wifi card that I will put in.