Difficulty
Easy
Steps
4
Time Required
2 - 3 minutes
Sections
2
- Bottom Cover
- 2 steps
- RAM
- 2 steps
Flags
0
BackLenovo Yoga 720-15IKB
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bottom Cover
- Power off the device before starting.
- Flip the device over with the hinges facing away from you.
- Remove seven 5.0 mm Torx T5 screws.
- Remove three 9.5 mm Torx T5 screws.
Power off the device before starting.
Flip the device over with the hinges facing away from you.
Remove seven 5.0 mm Torx T5 screws.
Remove three 9.5 mm Torx T5 screws.
1024
Step 2
- Pry around the edges from one side to another with a plastic opening tool.
- Do not pry on the side with the hinges because this can break the cover.
- Lift the case from the front until you feel resistance.
- Do not keep lifting after you feel resistance, or the bottom cover can break.
- Pull the cover towards you, away from the hinges.
- Completely lift off the cover.
Pry around the edges from one side to another with a plastic opening tool.
Do not pry on the side with the hinges because this can break the cover.
Lift the case from the front until you feel resistance.
Do not keep lifting after you feel resistance, or the bottom cover can break.
Pull the cover towards you, away from the hinges.
Completely lift off the cover.
Step 3
RAM
- Use your fingers to pry the RAM cover loose and remove it.
- If you are having trouble prying the cover loose with your fingers, use a plastic opening tool.
- When refitting the RAM cover, make sure that the cover maintains the same orientation and lines up with the tabs surrounding the RAM.
Use your fingers to pry the RAM cover loose and remove it.
If you are having trouble prying the cover loose with your fingers, use a plastic opening tool.
When refitting the RAM cover, make sure that the cover maintains the same orientation and lines up with the tabs surrounding the RAM.
Step 4
- Push outwards on the levers holding the short edges of the RAM in place. This will release the RAM.
- Gently pull the RAM out, diagonally up and away from the socket.
Push outwards on the levers holding the short edges of the RAM in place. This will release the RAM.
Gently pull the RAM out, diagonally up and away from the socket.
To reassemble your device, follow these instructions in reverse order. Make sure to align the RAM cover with the tabs when popping it back on.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Shaina Bagri
Member since: 01/23/2020
366 Reputation
2 Guides authored
Badges:
7
+4 more badges
Team
Cal Poly, Team S19-G3, White Winter 2020
Member of Cal Poly, Team S19-G3, White Winter 2020
CPSU-WHITE-W20S19G3
4 Members
22 Guides authored