Difficulty
Moderate
Steps
9
Time Required
25 - 40 minutes
Sections
4
- Bottom Cover
- 2 steps
- Fan
- 2 steps
- Battery
- 3 steps
- Motherboard
- 2 steps
Flags
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Needs More Images
A few more images would make this guide’s procedures crystal clear.
Better Introduction
Improve this guide by completing or revising its introduction.
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackLenovo Yoga 720-15IKB
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bottom Cover
- Power off the device before starting.
- Flip the device over with the hinges facing away from you.
- Remove seven 5.0 mm Torx T5 screws.
- Remove three 9.5 mm Torx T5 screws.
Power off the device before starting.
Flip the device over with the hinges facing away from you.
Remove seven 5.0 mm Torx T5 screws.
Remove three 9.5 mm Torx T5 screws.
1024
Step 2
- Pry around the edges from one side to another with a plastic opening tool.
- Do not pry on the side with the hinges because this can break the cover.
- Lift the case from the front until you feel resistance.
- Do not keep lifting after you feel resistance, or the bottom cover can break.
- Pull the cover towards you, away from the hinges.
- Completely lift off the cover.
Pry around the edges from one side to another with a plastic opening tool.
Do not pry on the side with the hinges because this can break the cover.
Lift the case from the front until you feel resistance.
Do not keep lifting after you feel resistance, or the bottom cover can break.
Pull the cover towards you, away from the hinges.
Completely lift off the cover.
Step 3
Fan
- Remove the six 5.2mm Torx T5 screws holding the fan in place.
- Remove the five 5.0mm Torx T5 screws holding the fan in place.
Remove the six 5.2mm Torx T5 screws holding the fan in place.
Remove the five 5.0mm Torx T5 screws holding the fan in place.
Step 4
- Disconnect the two fan wire connectors.
- Firmly pull the connector out horizontally away from the socket.
- Carefully lift the fan up and out.
Disconnect the two fan wire connectors.
Firmly pull the connector out horizontally away from the socket.
Carefully lift the fan up and out.
Step 5
Battery
- Remove the four 4mm screws surrounding the battery with a Phillips #0 screwdriver.
- Each is marked by “M2x5” with a small white arrow pointing to the screw itself.
Remove the four 4mm screws surrounding the battery with a Phillips #0 screwdriver.
Each is marked by “M2x5” with a small white arrow pointing to the screw itself.
Step 6
- Pull firmly on the battery connector to disconnect it.
Pull firmly on the battery connector to disconnect it.
Step 7
- Lift the battery out of the case to remove it.
Lift the battery out of the case to remove it.
Step 8
Motherboard
- Using the Phillips #000 screwdriver, remove the five screws.
Using the Phillips #000 screwdriver, remove the five screws.
Step 9
- Disconnect the power outlet connector.
- Disconnect the speaker wire connector.
- Carefully lift the motherboard up and out of the device.
Disconnect the power outlet connector.
Disconnect the speaker wire connector.
Carefully lift the motherboard up and out of the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Jacob Proctor
Member since: 02/15/2021
219 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
The Citadel Military College of South Carolina, Team S1-G9, Eggleston Spring 2021
Member of The Citadel Military College of South Carolina, Team S1-G9, Eggleston Spring 2021
CMCSC-EGGLESTON-S21S1G9
3 Members
5 Guides authored