Difficulty

Moderate

Steps

4

Time Required

                          5 - 7 minutes            

Sections

2

  • Bottom Cover
  • 2 steps
  • Fan
  • 2 steps

Flags

0

  • BackLenovo Yoga 720-15IKB

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Bottom Cover               
  • Power off the device before starting.
  • Flip the device over with the hinges facing away from you.
  • Remove seven 5.0 mm Torx T5 screws.
  • Remove three 9.5 mm Torx T5 screws.

Power off the device before starting.

Flip the device over with the hinges facing away from you.

Remove seven 5.0 mm Torx T5 screws.

Remove three 9.5 mm Torx T5 screws.

1024

Step 2

  • Pry around the edges from one side to another with a plastic opening tool.
  • Do not pry on the side with the hinges because this can break the cover.
  • Lift the case from the front until you feel resistance.
  • Do not keep lifting after you feel resistance, or the bottom cover can break.
  • Pull the cover towards you, away from the hinges.
  • Completely lift off the cover.

Pry around the edges from one side to another with a plastic opening tool.

Do not pry on the side with the hinges because this can break the cover.

Lift the case from the front until you feel resistance.

Do not keep lifting after you feel resistance, or the bottom cover can break.

Pull the cover towards you, away from the hinges.

Completely lift off the cover.

Step 3

              Fan               
  • Remove the six 5.2mm Torx T5 screws holding the fan in place.
  • Remove the five 5.0mm Torx T5 screws holding the fan in place.

Remove the six 5.2mm Torx T5 screws holding the fan in place.

Remove the five 5.0mm Torx T5 screws holding the fan in place.

Step 4

  • Disconnect the two fan wire connectors.
  • Firmly pull the connector out horizontally away from the socket.
  • Carefully lift the fan up and out.

Disconnect the two fan wire connectors.

Firmly pull the connector out horizontally away from the socket.

Carefully lift the fan up and out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Shaina Bagri                     

Member since: 01/23/2020

366 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Cal Poly, Team S19-G3, White Winter 2020                        

                                                  Member of Cal Poly, Team S19-G3, White Winter 2020 



                    CPSU-WHITE-W20S19G3                     


                                            4 Members                     


                                            22 Guides authored