Difficulty
Moderate
Steps
9
Time Required
5 - 10 minutes
Sections
2
- Battery
- 5 steps
- Speaker
- 4 steps
Flags
0
BackLenovo Yoga 720-12IKB
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Your laptop is very convenient with all the features equipped with it, One of these features is having audio being produced through your laptop. Not having one of these features can be really annoying to deal with especially when its one of the main features which is audio.
There are some dangers when it comes to replacing any component in your device, please use caution as you replace components and be sure to use an ESD strap to protect your system as well.
What you need
Step 1
Battery
- Unscrew and remove the four 5.5 mm Phillips #00 screws on the back panel.
Unscrew and remove the four 5.5 mm Phillips #00 screws on the back panel.
1024
Step 2
- Pull down on the cover to remove it and you will see the battery after removing the cover.
Pull down on the cover to remove it and you will see the battery after removing the cover.
Step 3
- Unscrew and remove the 4.0 mm Phillips #00 screws on the battery to remove it from the motherboard.
Unscrew and remove the 4.0 mm Phillips #00 screws on the battery to remove it from the motherboard.
Step 4
- Remove the battery wires from the socket on the motherboard above the battery.
Remove the battery wires from the socket on the motherboard above the battery.
Step 5
- Finally remove the battery from the case.
Finally remove the battery from the case.
Step 6
Speaker
- Take out the speaker connector to the motherboard by pulling on it gently.
Take out the speaker connector to the motherboard by pulling on it gently.
Step 7
- The speakers for the laptop can be found on the bottom corners of the device.
The speakers for the laptop can be found on the bottom corners of the device.
Step 8
- Start by taking out the twisted cables under the tabs with tweezers.
Start by taking out the twisted cables under the tabs with tweezers.
Step 9
- After taking the twisted cables out from under the tabs you can now lift up on both sides to remove the speakers.
After taking the twisted cables out from under the tabs you can now lift up on both sides to remove the speakers.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Alex Escobar
Member since: 02/10/2022
778 Reputation
6 Guides authored
Badges:
4
+1 more badge
Team
Gateway, Team 1-4, Pee Spring 2022
Member of Gateway, Team 1-4, Pee Spring 2022
GCC-PEE-S22S1G4
3 Members
6 Guides authored
