Difficulty
Moderate
Steps
14
Time Required
30 minutes
Sections
5
- Back Cover
- 2 steps
- Battery
- 3 steps
- Fans
- 3 steps
- SSD
- 3 steps
- Motherboard
- 3 steps
Flags
1
Inconsistent Images
Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.
BackLenovo Yoga 710-15ISK
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Flip your laptop over so the bottom is facing upwards.
- Remove ten 2 mm screws securing the back cover to the laptop using a Phillips #0 screwdriver.
Flip your laptop over so the bottom is facing upwards.
Remove ten 2 mm screws securing the back cover to the laptop using a Phillips #0 screwdriver.
1024
Step 2
- Pry the back cover off of the laptop with your fingers.
Pry the back cover off of the laptop with your fingers.
Step 3
Battery
- Remove the four 2 mm screws from the battery using a Phillips #0 screwdriver.
Remove the four 2 mm screws from the battery using a Phillips #0 screwdriver.
Step 4
- Remove the connector between the battery and the motherboard by gently pulling the black plastic-coated part of the wires.
Remove the connector between the battery and the motherboard by gently pulling the black plastic-coated part of the wires.
Step 5
- Remove the battery from the laptop.
Remove the battery from the laptop.
Step 6
Fans
- Remove the four 1.5 mm screws from the fans with a Phillips #00 screwdriver.
Remove the four 1.5 mm screws from the fans with a Phillips #00 screwdriver.
Step 7
- Unplug the wire connecting the fan to the motherboard by gently pulling the white head from the port.
Unplug the wire connecting the fan to the motherboard by gently pulling the white head from the port.
Step 8
- Lift both fans to remove them from the laptop.
Lift both fans to remove them from the laptop.
Step 9
SSD
- Remove the sticker from the SSD to gain access to the screw underneath.
Remove the sticker from the SSD to gain access to the screw underneath.
Step 10
- Remove the screw holding the SSD in place using a Phillips #0 screwdriver.
- Gently pull on the plastic clip next to the screw until the stick is freed and bounces up.
Remove the screw holding the SSD in place using a Phillips #0 screwdriver.
Gently pull on the plastic clip next to the screw until the stick is freed and bounces up.
Step 11
- Slide the SSD out of the laptop.
Slide the SSD out of the laptop.
Step 12
Motherboard
- Remove seven 2 mm screws from the motherboard using a Phillips #0 screwdriver.
Remove seven 2 mm screws from the motherboard using a Phillips #0 screwdriver.
Step 13
- Unplug four cables attached to the motherboard.
- For the flat ribbon wires, lift the black tabs holding them in place before removing them.
Unplug four cables attached to the motherboard.
For the flat ribbon wires, lift the black tabs holding them in place before removing them.
Step 14
- Carefully lift out the motherboard to remove it from the laptop.
Carefully lift out the motherboard to remove it from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Annette Limoges
Member since: 10/25/2021
181 Reputation
2 Guides authored
Badges:
4
+1 more badge
Team
UMass Dartmouth, Team 7-1, Sinclaire Spring 2022
Member of UMass Dartmouth, Team 7-1, Sinclaire Spring 2022
UMASSD-SINCLAIRE-S22S7G1
5 Members
8 Guides authored
