Difficulty
Easy
Steps
11
Time Required
8 - 15 minutes
Sections
1
- Trackpad
- 11 steps
Flags
0
BackLenovo Yoga 710-15IKB
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Trackpad
- Remove the ten 3.3 mm screws from the base cover using the T5 Torx screwdriver.
Remove the ten 3.3 mm screws from the base cover using the T5 Torx screwdriver.
1024
Step 2
- Slide opening tool between the base and back cover.
Slide opening tool between the base and back cover.
Step 3
- Lift back cover.
Lift back cover.
Step 4
- Remove the four 3.5 mm screws around the battery using the Phillips 00 screwdriver.
Remove the four 3.5 mm screws around the battery using the Phillips 00 screwdriver.
Step 5
- Disconnect the battery from the motherboard.
Disconnect the battery from the motherboard.
Step 6
- Lift battery up gently to remove.
Lift battery up gently to remove.
Step 7
- Use the JIS 1 screwdriver bit to unscrew the 3 screws.
Use the JIS 1 screwdriver bit to unscrew the 3 screws.
Step 8
- Grip the tab firmly.
Grip the tab firmly.
Step 9
- Pull tab until it disconnects from the trackpad. Be gentle - you do not want to damage any part of the tab.
Pull tab until it disconnects from the trackpad. Be gentle - you do not want to damage any part of the tab.
Step 10
- Gently lift the tape with angled tweezers.
Gently lift the tape with angled tweezers.
Step 11
- Push the trackpad to remove it.
Push the trackpad to remove it.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Author
with 1 other contributor
Hanna Deon
Member since: 09/28/2017
245 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
University of Maine, Team S1-G5, Diaz Fall 2017
Member of University of Maine, Team S1-G5, Diaz Fall 2017
UMAINE-DIAZ-F17S1G5
4 Members
10 Guides authored
