Difficulty

Moderate

Steps

4

Time Required

                          10 minutes            

Sections

2

  • Back Cover
  • 2 steps
  • SSD
  • 2 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackLenovo Yoga 710-14IKB

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Back Cover               
  • Ensure your device is completely OFF before starting this guide.
  • Use a Torx T4 screwdriver to unscrew the nine 5 mm screws holding the cover in place.
  • Use a Torx T4 screwdriver to unscrew the 8 mm screw in the center.
  • When, reassembling, make sure not to tighten the screws too much or you may risk cracking the plastic cover.

Ensure your device is completely OFF before starting this guide.

Use a Torx T4 screwdriver to unscrew the nine 5 mm screws holding the cover in place.

Use a Torx T4 screwdriver to unscrew the 8 mm screw in the center.

When, reassembling, make sure not to tighten the screws too much or you may risk cracking the plastic cover.

1024

Step 2

  • Use the plastic opening tool to pry the cover up and away from the laptop, starting at one end and working your way around the cover.
  • The cover is large and flat and made of thin plastic. It cracks easily, so make sure not to pry too hard.

Use the plastic opening tool to pry the cover up and away from the laptop, starting at one end and working your way around the cover.

The cover is large and flat and made of thin plastic. It cracks easily, so make sure not to pry too hard.

Step 3

              SSD               
  • Use a Phillips #00 screwdriver to remove the 3mm screw on the SSD.

Use a Phillips #00 screwdriver to remove the 3mm screw on the SSD.

Step 4

  • Use your fingers to lift up the SSD and pull away from the socket removing it from the laptop.

Use your fingers to lift up the SSD and pull away from the socket removing it from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Grant Doerksen                     

Member since: 04/17/2017

951 Reputation

                                      5 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges                           

Team

                       Cal Poly, Team S14-G5, Banghart Spring 2017                        

                                                  Member of Cal Poly, Team S14-G5, Banghart Spring 2017 



                    CPSU-BANGHART-S17S14G5                     


                                            4 Members                     


                                            21 Guides authored