Difficulty
Moderate
Steps
5
Time Required
15 minutes
Sections
2
- Back Cover
- 2 steps
- Battery
- 3 steps
Flags
0
BackLenovo Yoga 710-14IKB
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Ensure your device is completely OFF before starting this guide.
- Use a Torx T4 screwdriver to unscrew the nine 5 mm screws holding the cover in place.
- Use a Torx T4 screwdriver to unscrew the 8 mm screw in the center.
- When, reassembling, make sure not to tighten the screws too much or you may risk cracking the plastic cover.
Ensure your device is completely OFF before starting this guide.
Use a Torx T4 screwdriver to unscrew the nine 5 mm screws holding the cover in place.
Use a Torx T4 screwdriver to unscrew the 8 mm screw in the center.
When, reassembling, make sure not to tighten the screws too much or you may risk cracking the plastic cover.
1024
Step 2
- Use the plastic opening tool to pry the cover up and away from the laptop, starting at one end and working your way around the cover.
- The cover is large and flat and made of thin plastic. It cracks easily, so make sure not to pry too hard.
Use the plastic opening tool to pry the cover up and away from the laptop, starting at one end and working your way around the cover.
The cover is large and flat and made of thin plastic. It cracks easily, so make sure not to pry too hard.
Step 3
Battery
- Use a Phillips #00 screwdriver to remove the four 3 mm screws holding the battery in place.
- Be careful not to cross-thread the screws. Also, don’t let the screws fall down into the laptop case.
Use a Phillips #00 screwdriver to remove the four 3 mm screws holding the battery in place.
Be careful not to cross-thread the screws. Also, don’t let the screws fall down into the laptop case.
Step 4
- Use your fingers or an opening tool to slide the battery connector out of its motherboard socket.
Use your fingers or an opening tool to slide the battery connector out of its motherboard socket.
Step 5
- Remove the battery.
Remove the battery.
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Cancel: I did not complete this guide.
17 other people completed this guide.
Author
with 6 other contributors
Grant Doerksen
Member since: 04/17/2017
951 Reputation
5 Guides authored
Badges:
17
+14 more badges
Team
Cal Poly, Team S14-G5, Banghart Spring 2017
Member of Cal Poly, Team S14-G5, Banghart Spring 2017
CPSU-BANGHART-S17S14G5
4 Members
21 Guides authored
envykiss99 - Dec 3, 2017
Reply
Thank you for posting this battery replacement guide! I’m not huge on computer tech stuff and because of the holidays a lot of repair shops were closed. So, I found this, the tools I needed and bought a battery off ebay and I did it myself. I saved so much time and money(i’m sure) because of these simple instructions. Although I have the 710-15IKB, everything was basically identical. Thank you !
Thank you making this guide for a battery replacement!
chrismark1 - Mar 20, 2021
Reply
I replaced the battery, but now the computer won’t turn on! what am I doing wrong?
Arthur Shi - Mar 22, 2021
I you haven’t yet, try plugging the laptop into power to see if it runs off of AC power.
John Smith - Mar 28, 2021
Reply
Worked great. thx