Lenovo Yoga 710 11Isk Battery Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 - 10 minutes

Sections

Battery
4 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

BackLenovo Yoga 710-11ISK
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Flip the device having the bottom panel facing you.
Remove the eleven 5mm Torx T5 screws from the back panel.

Flip the device having the bottom panel facing you.

Remove the eleven 5mm Torx T5 screws from the back panel.

1024

Step 2

              Removing back cover

Remove the back panel carefully.
To remove the back cover, there are 5 plastic snap hooks that must be dislodged with a spudger or plastic pick tool.
Lay the device upside down with hinges away from you. Tilt it at 45 degree angle, leaving hinges down and open the screen slightly. Apply a little pressure on one corner to see where it separates. Then work from side to side to separate the back case from the top case. The back case is a shell with no components in it.

Remove the back panel carefully.

To remove the back cover, there are 5 plastic snap hooks that must be dislodged with a spudger or plastic pick tool.

Lay the device upside down with hinges away from you. Tilt it at 45 degree angle, leaving hinges down and open the screen slightly. Apply a little pressure on one corner to see where it separates. Then work from side to side to separate the back case from the top case. The back case is a shell with no components in it.

Step 3

Remove the two 3mm Phillips #1 screws that are holding the battery to the device.
Hold the bundled cable connector on each side and carefully pull the connector to release it from the motherboard.

Remove the two 3mm Phillips #1 screws that are holding the battery to the device.

Hold the bundled cable connector on each side and carefully pull the connector to release it from the motherboard.

Step 4

Remove the battery carefully from the device by lifting up the edge nearest you and then gently pull toward you to disconnect the power wires.

Remove the battery carefully from the device by lifting up the edge nearest you and then gently pull toward you to disconnect the power wires.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 7 other contributors

                    Teairra Woods

Member since: 04/11/2017

261 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       University of Memphis, Team S1-G4, Kim Spring 2017                        

                                                  Member of University of Memphis, Team S1-G4, Kim Spring 2017 



                    UM-KIM-S17S1G4                     


                                            4 Members                     


                                            2 Guides authored

Needs Better Images#

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Needs Better Images

Introduction

What you need

Team