Difficulty

Moderate

Steps

6

Time Required

                          5 - 15 minutes

Sections

1

  • Lower Case
  • 6 steps

Flags

0

  • BackLenovo Yoga 6 13ALC6

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Before you perform this repair, be sure to completely power off and unplug your laptop. Make sure the laptop is not in standby, sleep, or hibernation mode.

What you need

Step 1

              Unfasten the lower case
  • Use a T5 Torx screwdriver to remove the six 7.2 mm screws securing the lower case.

Use a T5 Torx screwdriver to remove the six 7.2 mm screws securing the lower case.

1024

Step 2

              Insert the opening pick
  • Insert an opening pick between the lower case and the chassis at a hinge corner.
  • Pry up with the pick to release the clips securing the lower case.
  • Repeat the process on the other hinge corner.

Insert an opening pick between the lower case and the chassis at a hinge corner.

Pry up with the pick to release the clips securing the lower case.

Repeat the process on the other hinge corner.

Step 3

              Release the clips
  • Slide the pick along the right edge to release the clips securing the lower case.

Slide the pick along the right edge to release the clips securing the lower case.

Step 4

              Release the remaining clips
  • Continue sliding the opening pick along the front and left edges to release the remaining clips.

Continue sliding the opening pick along the front and left edges to release the remaining clips.

Step 5

  • Insert the pick on the hinge edge and slide along the entire edge to release all of the clips.

Insert the pick on the hinge edge and slide along the entire edge to release all of the clips.

Step 6

  • Lift the lower case from the chassis and remove it.
  • During reassembly, this is a good point to power on your laptop and test all functions before sealing it up. Be sure to power your laptop back down before you continue working.

Lift the lower case from the chassis and remove it.

During reassembly, this is a good point to power on your laptop and test all functions before sealing it up. Be sure to power your laptop back down before you continue working.

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Lenovo Yoga answers community for help.

Cancel: I did not complete this guide.

Author

                    Spencer Day

Member since: 09/14/2022

11,019 Reputation

                                      84 Guides authored                  



                       Badges:
                       21







                                                        +18 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,772 Guides authored