Difficulty
Easy
Steps
9
Time Required
10 minutes
Sections
3
- Back Case
- 2 steps
- Battery
- 2 steps
- Speaker
- 5 steps
Flags
0
BackLenovo Yoga 3 14
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Case
- Remove the eleven 6mm T5 Torx screws from the back case.
Remove the eleven 6mm T5 Torx screws from the back case.
1024
Step 2
- Insert the plastic opening tool into the long side of the case backing and slide it the entire length of the laptop.
- Gently lift the backing off the laptop.
Insert the plastic opening tool into the long side of the case backing and slide it the entire length of the laptop.
Gently lift the backing off the laptop.
Step 3
Battery
- Remove the four 3mm PH#0 screws surrounding the battery.
Remove the four 3mm PH#0 screws surrounding the battery.
Step 4
- Gently lift the battery and use the plastic opening tool to remove the battery’s connection to the laptop.
Gently lift the battery and use the plastic opening tool to remove the battery’s connection to the laptop.
Step 5
Speaker
- Using a pair of tweezers, dissconnect the speakers on the left side of the laptop.
Using a pair of tweezers, dissconnect the speakers on the left side of the laptop.
Step 6
- Flip up the black retaining flap on the ZIF connector.
- Using tweezers, gently disconnect the blue strip that connects the touch pad to the motherboard.
Flip up the black retaining flap on the ZIF connector.
Using tweezers, gently disconnect the blue strip that connects the touch pad to the motherboard.
Step 7
- Use tweezers to gently pull off tape that is holding down wires that are connecting the two speakers together.
Use tweezers to gently pull off tape that is holding down wires that are connecting the two speakers together.
Step 8
- Both speakers are held in place by plastic pegs. Gently lift the speakers off the casing to remove them.
Both speakers are held in place by plastic pegs. Gently lift the speakers off the casing to remove them.
Step 9
- Simply grip the speaker wires and lift away from laptop to remove.
Simply grip the speaker wires and lift away from laptop to remove.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Matthew Victores
Member since: 09/28/2016
602 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
USF Tampa, Team 3-2, Passmore Fall 2016
Member of USF Tampa, Team 3-2, Passmore Fall 2016
USFT-PASSMORE-F16S3G2
4 Members
7 Guides authored