Difficulty

Moderate

Steps

9

Time Required

                          30 - 40 minutes

Sections

3

  • Lower Case
  • 1 step
  • Battery
  • 4 steps
  • Trackpad
  • 4 steps

Flags

2

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

  • BackLenovo Yoga 3 11

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Lower Case
  • Remove the eleven 6 mm T5 Torx screws securing the lower case.
  • Gently lift the lower case up and away from the device.

Remove the eleven 6 mm T5 Torx screws securing the lower case.

Gently lift the lower case up and away from the device.

1024

Step 2

              Battery
  • Remove the two 3 mm Phillips #00 screws securing the battery.
  • There are arrows on the battery indicating the location of the screws.

Remove the two 3 mm Phillips #00 screws securing the battery.

There are arrows on the battery indicating the location of the screws.

Step 3

  • Use a pair of tweezers to gently disconnect the battery connector.

Use a pair of tweezers to gently disconnect the battery connector.

Step 4

  • Use a pair of tweezers to gently disconnect the speaker cable.
  • Remove the wires from underneath the battery tabs using the tweezers.

Use a pair of tweezers to gently disconnect the speaker cable.

Remove the wires from underneath the battery tabs using the tweezers.

Step 5

  • Carefully remove the battery from the device.

Carefully remove the battery from the device.

Step 6

              Trackpad
  • Remove the four 2 mm Phillips #0 securing the trackpad.

Remove the four 2 mm Phillips #0 securing the trackpad.

Step 7

  • Use the tweezers to partially remove the tape.

Use the tweezers to partially remove the tape.

Step 8

  • Use a pair of tweezers to disconnect the ZIF connector securing the trackpad ribbon cable. Gently lift up the black tab and the ribbon cable should come free.

Use a pair of tweezers to disconnect the ZIF connector securing the trackpad ribbon cable. Gently lift up the black tab and the ribbon cable should come free.

Step 9

  • Slightly push down with your thumb to pop out the trackpad.
  • The laptop must be slightly open in order for the trackpad to pop out.

Slightly push down with your thumb to pop out the trackpad.

The laptop must be slightly open in order for the trackpad to pop out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Slade Fernandes

Member since: 08/27/2015

520 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       USF Tampa, Team 2-3, Blackwell Fall 2015                        

                                                  Member of USF Tampa, Team 2-3, Blackwell Fall 2015 



                    USFT-BLACKWELL-F15S2G3                     


                                            4 Members                     


                                            11 Guides authored

M T Martinez - Sep 18, 2018

Reply

Very brief, great illustrations. Now, I need to try it.