Difficulty
Moderate
Steps
9
Time Required
20 - 30 minutes
Sections
3
- Lower Case
- 1 step
- Battery
- 4 steps
- Speaker
- 4 steps
Flags
Needs More Images
A few more images would make this guide’s procedures crystal clear.
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackLenovo Yoga 3 11
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Lower Case
- Remove the eleven 6 mm T5 Torx screws securing the lower case.
- Gently lift the lower case up and away from the device.
Remove the eleven 6 mm T5 Torx screws securing the lower case.
Gently lift the lower case up and away from the device.
1024
Step 2
Battery
- Remove the two 3 mm Phillips #00 screws securing the battery.
- There are arrows on the battery indicating the location of the screws.
Remove the two 3 mm Phillips #00 screws securing the battery.
There are arrows on the battery indicating the location of the screws.
Step 3
- Use a pair of tweezers to gently disconnect the battery connector.
Use a pair of tweezers to gently disconnect the battery connector.
Step 4
- Use a pair of tweezers to gently disconnect the speaker cable.
- Remove the wires from underneath the battery tabs using the tweezers.
Use a pair of tweezers to gently disconnect the speaker cable.
Remove the wires from underneath the battery tabs using the tweezers.
Step 5
- Carefully remove the battery from the device.
Carefully remove the battery from the device.
Step 6
Speaker
- Use a pair of tweezers to peel up one side of each of the 3 pieces of tape that cover the speaker wires.
Use a pair of tweezers to peel up one side of each of the 3 pieces of tape that cover the speaker wires.
Step 7
- Use a pair of tweezers to disconnect the ZIF connector securing the trackpad ribbon cable. Gently lift the black tab up, and the cable should come free.
Use a pair of tweezers to disconnect the ZIF connector securing the trackpad ribbon cable. Gently lift the black tab up, and the cable should come free.
Step 8
- Remove the two 2 mm Phillips #0 screws securing the left speaker.
- Remove the two 2 mm Phillips #0 screws securing the right speaker.
Remove the two 2 mm Phillips #0 screws securing the left speaker.
Remove the two 2 mm Phillips #0 screws securing the right speaker.
Step 9
- Use a pair of tweezers to disconnect the speaker connector.
- Gently lift the speakers free of the device.
Use a pair of tweezers to disconnect the speaker connector.
Gently lift the speakers free of the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Slade Fernandes
Member since: 08/27/2015
520 Reputation
3 Guides authored
Badges:
11
+8 more badges
Team
USF Tampa, Team 2-3, Blackwell Fall 2015
Member of USF Tampa, Team 2-3, Blackwell Fall 2015
USFT-BLACKWELL-F15S2G3
4 Members
11 Guides authored