Lenovo Yoga 2 13 Screen Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          10 - 45 minutes            

Sections

1

• Screen
• 5 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

• BackLenovo Yoga 2 13"

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Screen               

• Using an opening pick, remove one small black rectangle piece on each of the hinge corners to locate screws.
• Using a Phillips head screwdriver, carefully remove one 4.8 mm screw from each corner.

Using an opening pick, remove one small black rectangle piece on each of the hinge corners to locate screws.

Using a Phillips head screwdriver, carefully remove one 4.8 mm screw from each corner.

1024

Step 2

• Using the Jimmy, remove the long centerpiece covering between the hinges.

Using the Jimmy, remove the long centerpiece covering between the hinges.

Step 3

• Detach the screen from the front panel by sliding the screen up about 2mm. Do not pull too far, as there are still connected wires.

Detach the screen from the front panel by sliding the screen up about 2mm. Do not pull too far, as there are still connected wires.

Step 4

• Locate the gold wire and follow it to two clips. Remove the clips and the clear tape securing the wire.
• Gently unsnap the wire from the hooks along the perimeter, and remove any tape along the wire.

Locate the gold wire and follow it to two clips. Remove the clips and the clear tape securing the wire.

Gently unsnap the wire from the hooks along the perimeter, and remove any tape along the wire.

Step 5

• Completely separate the screen from the laptop.
• During reassembly, remember to set the screen about 2 mm beyond the lid top edge. Then, slide down to engage the hinges.

Completely separate the screen from the laptop.

During reassembly, remember to set the screen about 2 mm beyond the lid top edge. Then, slide down to engage the hinges.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      10 other people completed this guide.                                             

Author

                                      with 8 other contributors 

                    Nichelle                     

Member since: 03/11/2015

1,538 Reputation

                                      5 Guides authored                  



                       Badges:
                       23







                                                        +20 more badges                           

Team

                       Marist, Team 1-2, Laflen Spring 2015                        

                                                  Member of Marist, Team 1-2, Laflen Spring 2015 



                    MARS-LAFLEN-S15S1G2                     


                                            3 Members                     


                                            6 Guides authored                     

Simon - Dec 12, 2016

Reply

Hi Nichelle,

thanks for your guide. Step 1 and 2 - no problem. But how actually did you do step 3? I can’t detach the screen, I can just lift it a few millimeters at the corners or at the side, totally hard..

edit: Ok got it: slide the touch-lcd up a bit :)

Emmanuel Duarte - Sep 25, 2017

Reply

Hey Nichelle, do you have any recommended vendors for both the screen and the digitizer? Thanks!

ken - Sep 26, 2017

Reply

I used laptopscreen.com.