Difficulty

Moderate

Steps

8

Time Required

                          5 minutes

Sections

3

  • Back Panel
  • 2 steps
  • Battery
  • 4 steps
  • Speaker
  • 2 steps

Flags

0

  • BackLenovo Yoga 2 11" 20428

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Flip the computer over so the bottom is facing up.
  • Remove the ten 6mm screws with a T5 Torx security screwdriver.

Flip the computer over so the bottom is facing up.

Remove the ten 6mm screws with a T5 Torx security screwdriver.

1024

Step 2

  • Carefully remove the back panel by gently prying the panel from the front to the back.
  • Take care not to pull any wires or crack the outer shell.

Carefully remove the back panel by gently prying the panel from the front to the back.

Take care not to pull any wires or crack the outer shell.

Step 3

              Battery
  • Remove the six 3.3 mm Phillips #000 screws around the perimeter of the battery.
  • Remove the single 6.75 mm Phillips #000 screw from the center of the battery.

Remove the six 3.3 mm Phillips #000 screws around the perimeter of the battery.

Remove the single 6.75 mm Phillips #000 screw from the center of the battery.

Step 4

  • Remove the pieces of tape securing the Bluetooth/Wi-Fi antenna.

Remove the pieces of tape securing the Bluetooth/Wi-Fi antenna.

Step 5

  • Grip the base of the connector with your fingers or pliers, and gently pull the connector straight back towards you to remove it.
  • If possible, do not to pull the connector out by the wires, as this can damage the connector.

Grip the base of the connector with your fingers or pliers, and gently pull the connector straight back towards you to remove it.

If possible, do not to pull the connector out by the wires, as this can damage the connector.

Step 6

  • Carefully remove the battery from the laptop.
  • Take care not to pull out the Bluetooth antenna while removing the battery.

Carefully remove the battery from the laptop.

Take care not to pull out the Bluetooth antenna while removing the battery.

Step 7

              Speaker
  • Unscrew the four 1.7 mm Phillips #000 screws.

Unscrew the four 1.7 mm Phillips #000 screws.

Step 8

  • Detach the speaker wire and remove the speaker.

Detach the speaker wire and remove the speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Joshua Thomas Tyler

Member since: 03/18/2019

681 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       University of Memphis, Team S1-G2, Kim Spring 2019                        

                                                  Member of University of Memphis, Team S1-G2, Kim Spring 2019 



                    UM-KIM-S19S1G2                     


                                            3 Members                     


                                            6 Guides authored