Difficulty

Moderate

Steps

28

Time Required

Suggest a time??

Sections

7

  • Back Panel
  • 2 steps
  • Battery
  • 4 steps
  • Speaker
  • 2 steps
  • Hard Drive
  • 2 steps
  • Bluetooth Module
  • 2 steps
  • Motherboard
  • 10 steps
  • Keyboard
  • 6 steps

Flags

2

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackLenovo Yoga 2 11" 20428

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Step 1

              Back Panel
  • Flip the computer over so the bottom is facing up.
  • Remove the ten 6mm screws with a T5 Torx security screwdriver.

Flip the computer over so the bottom is facing up.

Remove the ten 6mm screws with a T5 Torx security screwdriver.

1024

Step 2

  • Carefully remove the back panel by gently prying the panel from the front to the back.
  • Take care not to pull any wires or crack the outer shell.

Carefully remove the back panel by gently prying the panel from the front to the back.

Take care not to pull any wires or crack the outer shell.

Step 3

              Battery
  • Remove the six 3.3 mm Phillips #000 screws around the perimeter of the battery.
  • Remove the single 6.75 mm Phillips #000 screw from the center of the battery.

Remove the six 3.3 mm Phillips #000 screws around the perimeter of the battery.

Remove the single 6.75 mm Phillips #000 screw from the center of the battery.

Step 4

  • Remove the pieces of tape securing the Bluetooth/Wi-Fi antenna.

Remove the pieces of tape securing the Bluetooth/Wi-Fi antenna.

Step 5

  • Grip the base of the connector with your fingers or pliers, and gently pull the connector straight back towards you to remove it.
  • If possible, do not to pull the connector out by the wires, as this can damage the connector.

Grip the base of the connector with your fingers or pliers, and gently pull the connector straight back towards you to remove it.

If possible, do not to pull the connector out by the wires, as this can damage the connector.

Step 6

  • Carefully remove the battery from the laptop.
  • Take care not to pull out the Bluetooth antenna while removing the battery.

Carefully remove the battery from the laptop.

Take care not to pull out the Bluetooth antenna while removing the battery.

Step 7

              Speaker
  • Unscrew the four 1.7 mm Phillips #000 screws.

Unscrew the four 1.7 mm Phillips #000 screws.

Step 8

  • Detach the speaker wire and remove the speaker.

Detach the speaker wire and remove the speaker.

Step 9

              Hard Drive
  • Remove the four 3.3 mm Phillips #000 screws securing the hard drive to the panel.

Remove the four 3.3 mm Phillips #000 screws securing the hard drive to the panel.

Step 10

  • Lift the hard drive up, turn it over, and remove the connection.

Lift the hard drive up, turn it over, and remove the connection.

Step 11

              Bluetooth Module
  • Remove the two 3.3 mm Phillips #000 screws.

Remove the two 3.3 mm Phillips #000 screws.

Step 12

  • Grab and gently remove the Bluetooth module.

Grab and gently remove the Bluetooth module.

Step 13

              Motherboard
  • Using your finger nail or a thin pry tool, unlock and remove the cables.
  • Lift the tape and pull the cable connector back to remove it from the motherboard.
  • Remove the eight 3.8mm screws with a Phillips #000 screwdriver.

Using your finger nail or a thin pry tool, unlock and remove the cables.

Lift the tape and pull the cable connector back to remove it from the motherboard.

Remove the eight 3.8mm screws with a Phillips #000 screwdriver.

Step 14

  • Using your fingernail or a thin pry tool, lift the white bar on the cable to release it.
  • Pull the cable out.

Using your fingernail or a thin pry tool, lift the white bar on the cable to release it.

Pull the cable out.

Step 15

  • Using a fingernail or a thin pry tool, lift the white bar on the cables.
  • Pull the cable out of the connector.

Using a fingernail or a thin pry tool, lift the white bar on the cables.

Pull the cable out of the connector.

Step 16

  • Lift the wide cable in the center to reveal the port for the small cable underneath.
  • Using a fingernail or a thin pry tool, lift the white bar to release the cable.
  • Remove the cable from the connector.

Lift the wide cable in the center to reveal the port for the small cable underneath.

Using a fingernail or a thin pry tool, lift the white bar to release the cable.

Remove the cable from the connector.

Step 17

  • Lift the tape up to separate from the motherboard.
  • Using a fingernail or a thin pry tool, lift the connector upwards to separate from the motherboard.

Lift the tape up to separate from the motherboard.

Using a fingernail or a thin pry tool, lift the connector upwards to separate from the motherboard.

Step 18

  • Remove the black tape covering the connector.
  • Pull straight backwards to remove from the motherboard.

Remove the black tape covering the connector.

Pull straight backwards to remove from the motherboard.

Step 19

  • Pull the cable straight backwards to remove it.

Pull the cable straight backwards to remove it.

Step 20

Step 21

  • Remove the seven 3.6mm screws using a Phillips #000 screwdriver.

Remove the seven 3.6mm screws using a Phillips #000 screwdriver.

Step 22

  • Lift and pull backwards to remove the motherboard.

Lift and pull backwards to remove the motherboard.

Step 23

              Keyboard
  • Unscrew and remove the 3.3 mm Phillips #000 screw that secures the daughterboard.

Unscrew and remove the 3.3 mm Phillips #000 screw that secures the daughterboard.

Step 24

  • Remove the daughterboard.

Remove the daughterboard.

Step 25

  • Take off the black clips.

Take off the black clips.

Step 26

  • Lift up the two metal piece that are coming from the display.

Lift up the two metal piece that are coming from the display.

Step 27

  • Lift up the metal piece.

Lift up the metal piece.

Step 28

  • Lift up the keyboard part.

Lift up the keyboard part.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Shalem

Member since: 03/30/2022

163 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       IUPUI, Team 1-3, Harley Spring 2022                        

                                                  Member of IUPUI, Team 1-3, Harley Spring 2022 



                    IUPUI-HARLEY-S22S1G3                     


                                            3 Members                     


                                            3 Guides authored