Lenovo Yoga 2 11 20428 Display Replacement Repair Guide

Difficulty

Moderate

Steps

10

Time Required

                          15 minutes            

Sections

1

• Display
• 10 steps

Flags

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

• BackLenovo Yoga 2 11" 20428

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Before beginning, turn off your device and disconnect it from any external power source.

It is important to lightly remove screws since not doing so may result in the threads being worn down. Remove all circuit boards carefully and keep away from water.

Step 6 requires you to unplug from the circuit board. Do so carefully as damaging the teeth may result in extra repair or replacement of the part

Step 7 requires you to pry the circuit board from the display cover. Do so carefully as damaging the teeth may result in extra repair or replacement of the part.

What you need

Step 1

              Display               

• Remove the plastic square covers on the hinge cover.

Remove the plastic square covers on the hinge cover.

1024

Step 2

• Remove the two 3.8 mm screws from the hinge cover.

Remove the two 3.8 mm screws from the hinge cover.

Step 3

• Remove the hinge cover.

Remove the hinge cover.

Step 4

• Remove the 2.8mm screws.
• Remove the 5mm screws.
• Remove the 2.4mm screws.

Remove the 2.8mm screws.

Remove the 5mm screws.

Remove the 2.4mm screws.

Step 5

• Remove the front cover of the display

Remove the front cover of the display

Step 6

• Unplug the button sensor board.
• Do not damage the teeth. Damaging the teeth of the sensor board may require you to replace the part.

Unplug the button sensor board.

Do not damage the teeth. Damaging the teeth of the sensor board may require you to replace the part.

Step 7

• Remove the 2.1 mm screws from the brightness sensor board.

Remove the 2.1 mm screws from the brightness sensor board.

Step 8

• Remove the 3.3 mm screw on the camera.
• Removal of the camera will result in the connecting wire to be disconnected as well

Remove the 3.3 mm screw on the camera.

Removal of the camera will result in the connecting wire to be disconnected as well

Step 9

• Remove the 3.3 mm screw on the touch control board.

Remove the 3.3 mm screw on the touch control board.

Step 10

• Remove the touch control board
• Do not damage the teeth. Damaging the teeth may call for replacement of the part.
• Removal of the touch control board will result in the connecting wires to be removed as well

Remove the touch control board

Do not damage the teeth. Damaging the teeth may call for replacement of the part.

Removal of the touch control board will result in the connecting wires to be removed as well

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Devin McCuen                     

Member since: 03/30/2022

181 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       IUPUI, Team 1-3, Harley Spring 2022                        

                                                  Member of IUPUI, Team 1-3, Harley Spring 2022 



                    IUPUI-HARLEY-S22S1G3                     


                                            3 Members                     


                                            3 Guides authored