Lenovo Y50 70 Touch Trackpad Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

Trackpad
16 steps

Flags

BackLenovo Y50-70 Touch
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

When performing this repair, ensure you are in a static free environment so as not to provide an electrical shock to the computer and possibly further damage the device.

What you need

Step 1

              Trackpad

Use a Phillips #1 screwdriver to unscrew and remove the ten 6 mm screws on the back of the laptop.
Grab and pull off the back.

Use a Phillips #1 screwdriver to unscrew and remove the ten 6 mm screws on the back of the laptop.

Grab and pull off the back.

1024

Step 2

Use a Phillips #1 screwdriver to unscrew and remove the four 6 mm screws that secure the battery.
Grab the battery cable and gently pull it free from the cable connector.
Remove the battery from the laptop.

Use a Phillips #1 screwdriver to unscrew and remove the four 6 mm screws that secure the battery.

Grab the battery cable and gently pull it free from the cable connector.

Remove the battery from the laptop.

Step 3

Use a Phillips #1 screwdriver to unscrew and remove the four 6 mm screws that secure the hard drive.
Grab the marked cable attached to the hard drive, and gently pull to unplug.
Remove the hard drive from the laptop.

Use a Phillips #1 screwdriver to unscrew and remove the four 6 mm screws that secure the hard drive.

Grab the marked cable attached to the hard drive, and gently pull to unplug.

Remove the hard drive from the laptop.

Step 4

Grab marked cables and pull them out from their plug-in.

Grab marked cables and pull them out from their plug-in.

Step 5

Grab the top set of marked cables and pull up to remove them.
Grab the lower marked cable and pull it out from the plug.

Grab the top set of marked cables and pull up to remove them.

Grab the lower marked cable and pull it out from the plug.

Step 6

Grab marked cables and pull up to unplug.

Grab marked cables and pull up to unplug.

Step 7

Grab the marked cable and pull out to unplug.

Grab the marked cable and pull out to unplug.

Step 8

Grab the black tab on top of the cable and pull up to unplug.

Grab the black tab on top of the cable and pull up to unplug.

Step 9

Lift the black tab on top of the marked cable.
Grab the colored tab on the cable and pull to remove the cable.

Lift the black tab on top of the marked cable.

Grab the colored tab on the cable and pull to remove the cable.

Step 10

Step 11

Step 12

Lift the black tab on top of the marked cables.
Grab the colored tab on the cables and pull to remove the cables.

Lift the black tab on top of the marked cables.

Grab the colored tab on the cables and pull to remove the cables.

Step 13

Carefully remove the yellow tape on top of the cable.
Lift the black tab on top of the marked cable.
Grab the colored tab on the cable and pull to remove the cable.

Carefully remove the yellow tape on top of the cable.

Step 14

Use a Phillips #1 screwdriver to unscrew and remove the six 7 mm screws from the heat sink.
Grab and lift the heatsink off the motherboard.

Use a Phillips #1 screwdriver to unscrew and remove the six 7 mm screws from the heat sink.

Grab and lift the heatsink off the motherboard.

Step 15

Use a Phillips #1 screwdriver to unscrew and remove the four 6 mm screws marked with red circles on the motherboard.
Grab and lift the motherboard up and out from the laptop.

Use a Phillips #1 screwdriver to unscrew and remove the four 6 mm screws marked with red circles on the motherboard.

Grab and lift the motherboard up and out from the laptop.

Step 16

Use a Phillips #1 screwdriver to unscrew and remove the two 6 mm screws at the top of the trackpad.
Push on the marked clips at the top of the trackpad.
Then, when undone from clips, lift the trackpad out from the laptop.

Use a Phillips #1 screwdriver to unscrew and remove the two 6 mm screws at the top of the trackpad.

Push on the marked clips at the top of the trackpad.

Then, when undone from clips, lift the trackpad out from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Ryan McCann

Member since: 04/12/2022

280 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       IUPUI, Team 6-6, Beck Spring 2022                        

                                                  Member of IUPUI, Team 6-6, Beck Spring 2022 



                    IUPUI-BECK-S22S6G6                     


                                            4 Members                     


                                            3 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team