Difficulty
Easy
Steps
5
Time Required
3 minutes
Sections
1
- Lenovo Vibe Z2 Pro Backplate Disassembly
- 5 steps
Flags
0
BackLenovo Vibe Z2 Pro
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Lenovo Vibe Z2 Pro Backplate Disassembly
- Remove the 4.9 mm torx head screws located on the camera plate on the back of the phone
Remove the 4.9 mm torx head screws located on the camera plate on the back of the phone
1024
Step 2
- Remove the 3.65 mm Torx head screws at the bottom of the phone.
Remove the 3.65 mm Torx head screws at the bottom of the phone.
Step 3
- Remove the SIM card tray by pushing a pin into the hole on the side of the phone.
Remove the SIM card tray by pushing a pin into the hole on the side of the phone.
Step 4
- Push the Spudger along the gap between the phone and the backplate to separate them.
Push the Spudger along the gap between the phone and the backplate to separate them.
Step 5
- Carefully pull the backplate away from the phone.
Carefully pull the backplate away from the phone.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
9 other people completed this guide.
Author
with 4 other contributors
Bryan Sepulveda
Member since: 09/15/2016
547 Reputation
3 Guides authored
Badges:
13
+10 more badges
Team
USF Tampa, Team 18-3, Blackwell Fall 2016
Member of USF Tampa, Team 18-3, Blackwell Fall 2016
USFT-BLACKWELL-F16S18G3
4 Members
12 Guides authored
