Difficulty

Moderate

Steps

7

Time Required

                          30 minutes

Sections

4

  • Battery
  • 2 steps
  • Speakers
  • 1 step
  • Fan
  • 1 step
  • Keyboard
  • 3 steps

Flags

3

Missed a Step

Oops! This guide is currently missing some important steps.

Scenic Route

This guide’s procedure isn’t the most efficient way to get the job done, but still may be useful in some circumstances.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackLenovo Yoga

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Flip the laptop over so the bottom is facing you.
  • Remove the ten screws using a Phillips #1 screwdriver.
  • Using the plastic opening tool, pry the bottom cover off the laptop.

Flip the laptop over so the bottom is facing you.

Remove the ten screws using a Phillips #1 screwdriver.

Using the plastic opening tool, pry the bottom cover off the laptop.

1024

Step 2

  • Remove two screws from the battery using a Phillips #1 screwdriver.
  • Disconnect the battery connector from the motherboard.
  • Remove the battery from the laptop.

Remove two screws from the battery using a Phillips #1 screwdriver.

Disconnect the battery connector from the motherboard.

Remove the battery from the laptop.

Step 3

              Speakers
  • Disconnect connectors. Use fingers to pinch and pull the connector out.

Disconnect connectors. Use fingers to pinch and pull the connector out.

Step 4

              Fan
  • Remove the two screws from the retainer for the ports using a Phillips #1 screwdriver.
  • Remove the nine screws from the motherboard using a Phillips #1 screwdriver.
  • Remove the four screws from the fan under the motherboard using a Phillips #1 screwdriver.
  • Remove the fan from the motherboard.

Remove the two screws from the retainer for the ports using a Phillips #1 screwdriver.

Remove the nine screws from the motherboard using a Phillips #1 screwdriver.

Remove the four screws from the fan under the motherboard using a Phillips #1 screwdriver.

Remove the fan from the motherboard.

Step 5

              Keyboard
  • Remove twelve screws from the midframe using a Phillips #1 screwdriver.

Remove twelve screws from the midframe using a Phillips #1 screwdriver.

Step 6

  • Use a spudger to pry open the keyboard panel.
  • Continue to pry until the panel is loose enough to take off.

Use a spudger to pry open the keyboard panel.

Continue to pry until the panel is loose enough to take off.

Step 7

  • Remove the keyboard from the laptop.

Remove the keyboard from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor 


                    Felicia McCarey

Member since: 10/28/2021

299 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       UMass Dartmouth, Team 4-4, Gulbrandsen Fall 2021                        

                                                  Member of UMass Dartmouth, Team 4-4, Gulbrandsen Fall 2021 



                    UMASSD-GULBRANDSEN-F21S4G4                     


                                            3 Members                     


                                            6 Guides authored