Difficulty

Moderate

Steps

4

Time Required

                          20 - 35 minutes            

Sections

3

  • Battery
  • 2 steps
  • Speakers
  • 1 step
  • Fan
  • 1 step

Flags

2

Missed a Step

Oops! This guide is currently missing some important steps.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackLenovo Yoga

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery               
  • Flip the laptop over so the bottom is facing you.
  • Remove the ten screws using a Phillips #1 screwdriver.
  • Using the plastic opening tool, pry the bottom cover off the laptop.

Flip the laptop over so the bottom is facing you.

Remove the ten screws using a Phillips #1 screwdriver.

Using the plastic opening tool, pry the bottom cover off the laptop.

1024

Step 2

  • Remove two screws from the battery using a Phillips #1 screwdriver.
  • Disconnect the battery connector from the motherboard.
  • Remove the battery from the laptop.

Remove two screws from the battery using a Phillips #1 screwdriver.

Disconnect the battery connector from the motherboard.

Remove the battery from the laptop.

Step 3

              Speakers               
  • Disconnect connectors. Use fingers to pinch and pull the connector out.

Disconnect connectors. Use fingers to pinch and pull the connector out.

Step 4

              Fan               
  • Remove the two screws from the retainer for the ports using a Phillips #1 screwdriver.
  • Remove the nine screws from the motherboard using a Phillips #1 screwdriver.
  • Remove the four screws from the fan under the motherboard using a Phillips #1 screwdriver.
  • Remove the fan from the motherboard.

Remove the two screws from the retainer for the ports using a Phillips #1 screwdriver.

Remove the nine screws from the motherboard using a Phillips #1 screwdriver.

Remove the four screws from the fan under the motherboard using a Phillips #1 screwdriver.

Remove the fan from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Craig                     

Member since: 10/28/2021

217 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       UMass Dartmouth, Team 4-4, Gulbrandsen Fall 2021                        

                                                  Member of UMass Dartmouth, Team 4-4, Gulbrandsen Fall 2021 



                    UMASSD-GULBRANDSEN-F21S4G4                     


                                            3 Members                     


                                            6 Guides authored