Difficulty

Easy

Steps

5

Time Required

                          7 minutes            

Sections

1

  • M.2 SSD
  • 5 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackLenovo ThinkPad Yoga 370

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

  • New M2 SSD compatible with your modelScrew like Phillips #1 Screwdriver or the tool provided on iFixit Tool.

I recommend to download also from Lenovo the official guides of your laptop as they have diagrams with the description of the motherboards and its components. In my case:

https://download.lenovo.com/pccbbs/mobil

What you need

Step 1

              Identify the specific model and locate the screws to loose               
  • Before remove the back-case of the laptop we have to remove the Pen Pro and the SD card if it is in your model (two boxes in orange on one of the photos).
  • Circles show the screws to loose. The yellow square indicates where the information about Model is found (20JJ in this case).

Before remove the back-case of the laptop we have to remove the Pen Pro and the SD card if it is in your model (two boxes in orange on one of the photos).

Circles show the screws to loose. The yellow square indicates where the information about Model is found (20JJ in this case).

1024

Step 2

              Loose the screws and take away the back case               
  • Note that after loose the screws we have to remove the case from the bottom part.
  • The all the screws remain attached to the back-cover as shown in the photos.
  • Note that the top part of the laptop back cover has several hooks done with plastic (see the photos with blue squares)

Note that after loose the screws we have to remove the case from the bottom part.

The all the screws remain attached to the back-cover as shown in the photos.

Note that the top part of the laptop back cover has several hooks done with plastic (see the photos with blue squares)

Step 3

              Identify the M2.SSD and the screw that attach it to the main board               
  • Laptop after remove the back-cover. The area in red has the M2.SSD.
  • The blue arrow shows where is the adhesive part of the M2.SSD that we have to carefully lift off but keeping attached the other part of the cover.
  • The green arrow shows the screw that we would have to remove to take away the M2.SSD.

Laptop after remove the back-cover. The area in red has the M2.SSD.

The blue arrow shows where is the adhesive part of the M2.SSD that we have to carefully lift off but keeping attached the other part of the cover.

The green arrow shows the screw that we would have to remove to take away the M2.SSD.

Step 4

              Remove the screw and insert the M2.SSD.               
  • First step is remove the screw (this one has to be full removed).
  • Then we can introduce the new M2.SSD, with a little bit of pressure.
  • Finally we can fix it with the previously removed screw. Everything should fit well without forcing any component.

First step is remove the screw (this one has to be full removed).

Then we can introduce the new M2.SSD, with a little bit of pressure.

Finally we can fix it with the previously removed screw. Everything should fit well without forcing any component.

Step 5

              Attach again the back case.               
  • To close the back case of the laptop we have to remember the position of the small hooks. Then apply some pressure and screw first the screws on top
  • After screw again all the 9 screws, we can attach again the Pen Pro and the SD card.
  • Its done.

To close the back case of the laptop we have to remember the position of the small hooks. Then apply some pressure and screw first the screws on top

After screw again all the 9 screws, we can attach again the Pen Pro and the SD card.

Its done.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Attached Documents

  • Yoga 370 User Guide
  • PDF - 8.52 mb
  • View

Yoga 370 User Guide

PDF - 8.52 mb

Author

                                      with 2 other contributors 

                    Ramiro                     

Member since: 03/08/2019

151 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Austin - Sep 15, 2021

Reply

excellent and easy to follow instruction. I used your set and sent it to a senior that needed to fix their laptops. No prior experience. It worked like a charm.